Fibreglass ponds with windows

We deliver all ponds on our own vans and to certain areas only at the web delivery prices, for other areas contact us if unsure.  

All sizes are approximate. Due to raw materials being varied in sizes etc the ponds with frames built in can vary in overall sizes. We always endeavour to keep sizes the same.

These ponds require setting up on a flat level solid surface such as concrete pad etc which has sufficient foundations under not to allow the pond to twist, a layer of kingspan insulation 50mm minimum should then go between the concrete and pond. This will allow the pond to bed down. 

Lead time on all ponds is normally 3-4 weeks, but during busy periods such as pond season it could be longer, please ask if unsure.

We recommend that these cladded or any exterior building work is completed after delivery to allow for any tolerances. 

The framework within  these ponds can be use for screwing and attaching cladding or facias easily. The new designed ponds are filled with insulation whilst in production to keep the water cooler during summer and warmer during the winter. With the nature of these pond there will be some natural flexing and this is due to construction techniques and materials used.

Please remember fibreglass products can have sharp edges.

We offer choices on colours and window options. Filter kits are also available for each size

The bases can be drilled but the sides are manufactured with a built in Insulation so not recommended to drill the sides