This is our basic pond which looks stunning in any setting. Can be carried easier than the other range of ponds due to the lip on top.

These vats with viewing window are made either  with a frame around the window and single reinforcing pieces on the ends and back which will allow cladding or a facia to be attached. Or new infinity versions

This is currently the only size which doesnt have flat sides , but the frame around can be used to atatch cladding etc if required. No insulation fitted on this model

The window is 56.5" x 20" for the standard version with frame around or for the infinity version 56.5" x 25" being most of the front

They require sitting on a layer of kingspan as our other designs

They can be drilled etc to allow use of overflows, bottom drains etc as required.

Standard colours are listed on the drop down menu other colours may be available made at additional cost.

This model is a s follows: approx sizes as guide

1420 litre capacity - 312 gallons

External 78" x 44" x 31" tall - 1990mm x 1120mm wide x 790mm tall

Internal 71" x 39" x 31" tall - 1800 mm x 1000mm x 785 mm tall

There is a slight taper from top to bottom of 1" - 25mm on all sides due to production techniques

Kingspan is available if required at checkout from drop down box.

Cladding can be attached to the ponds if needed by attaching to the internal frame just above and below the window height all around

Standard colours are listed on the drop down menu.

All sizes are approximate, due to the manufacture technique on these ponds, sizes will vary slightly from pond to pond. We recommend that these cladded or any exterior building work is completed after delivery to allow for any tolerances.

We offer filter kits , these comprise of high quality pressure filters - which are positioned outside the pond and work by a dirty water pump within the pond pumping water from the pond to the filter and past a UV light to prevent unsightly algae then through the main filter, with a return pie back to the pond , a feature or water blade can be added ( not supplied with the kit). A third pipe can them be sent to take away dirty water at the turn of a switch, this can be used around the garden for plants etc. 10mm of heavy duty pipe and all hose clips required are included.

comprises: (actual size of filters and pumps are different for the size of ponds)

Pressure filter with built in UV

Dirty water pump (to pump wastes)

Heavy duty hose and all clips required

This size pond will require a minimum of 2 strong people to unload safely plus the driver . however for safety the more the better.