These are our smallest standard size pools ideal for patios or smaller gardens and ideal for several goldfish or shubunkins. They look fantastic with a pond lily central and surrounding lighting.
The viewing window on this size is 1000mm x 550mm available as our standard design with frame above or infinity view (no frame above)
We recommend that these pond are sited on flat level evenly supported ground and a sheet of 40mm kingspan insulation placed underneath as any sharp points on concrete or flags etc may damage the fibreglass.
We offer filter kits , these comprise of high quality pressure filters - which are positioned outside the pond and work by a dirty water pump within the pond pumping water from the pond to the filter and past a UV light to prevent unsightly algae then through the main filter, with a return pie back to the pond , a feature or water blade can be added ( not supplied with the kit). A third pipe can them be sent to take away dirty water at the turn of a switch, this can be used around the garden for plants etc. 10mm of heavy duty pipe and all hose clips required are included.
comprises: (actual size of filters and pumps are different for the size of ponds)
Pressure filter with built in UV
Dirty water pump (to pump wastes)
Heavy duty hose and all clips required
Cladding can be attached to the ponds if needed by attaching to the internal frame just above and below the window height all around
Standard colours are listed on the drop down menu.
This model is a s follows:
950 litre capacity - 210 gallons based on 80cm tall or
1150 litres capacity -250 gallons based on 100cm tall version.
Overall size 1250mm long x 1250 mm wide x height 80 or 100 cm available.
Internal size 1100mm long x 1100mm wide x 80 or 100cm available
All sizes are approximate, due to the manufacture technique on these ponds, sizes will vary slightly from pond to pond. We recommend that these cladded or any exterior building work is completed after delivery to allow for any tolerances.
We offer filter kits , these comprise of high quality pressure filters - which are positioned outside the pond and work by a dirty water pump within the pond pumping water from the pond to the filter and past a UV light to prevent unsightly algae then through the main filter, with a return pie back to the pond , a feature or water blade can be added ( not supplied with the kit). A third pipe can them be sent to take away dirty water at the turn of a switch, this can be used around the garden for plants etc. 10mm of heavy duty pipe and all hose clips required are included.
comprises: (actual size of filters and pumps are different for the size of ponds)
Pressure filter with built in UV
Dirty water pump (to pump wastes)
Heavy duty hose and all clips required
This size pond will require a minimum of 1 strong person to unload safely plus the driver for the 80 cm tall or 2 plus the driver for the 100cm tall, however for safety the more the better.
Pics are to show design only they may not be actual pond size.
